Amateur radio tranceiver uses communication technologies such as WiFi that operates within a specific frequency spectrum. This technology must meet the main requirements through a standard testing process to ensure its quality, security, and compliance with applicable regulations.
With the increasing use of amateur radio tranceiver technology, the Indonesian government through Ministerial Decree (KEPMEN) No. 44 Tahun 2025 from the Ministry of Communication and Digital (KOMDIGI) has established wireless power transmission testing standards to ensure that these devices are safe, efficient, and do not interfere with each other.
WiFi technology, which is widely used in amateur radio tranceiver devices must comply with this standard to be used legally in Indonesia.
Also Read
This article will completely talk about the amateur radio tranceiver testing guidelines based on the most recent directions, counting the certification steps you require to know.
Table of Contents
New Regulations on Amateur Radio Transceiver
KEPMEN KOMINFO No. 44 Tahun 2025 specifies wireless power transmission operational frequencies to ensure devices work without interfering with other devices.
This control covers radio recurrence prerequisites, greatest transmit control, and testing for wild outflows (spurious emissions).
The following are the standard specifications:
| Types of Radio Frequency Bands | Radio Frequency Range | Conducted Output Power |
| LF | 135.7 – 137.8 kHz | ≤200W |
| MF | 472 – 479 kHz | ≤200W |
| 1800 – 2000 kHz | ||
| HF | 3500 – 3900 kHz | ≤200W |
| 5351.5 – 5366.5 kHz | ||
| 7000 – 7200 kHz | ||
| 10100 – 10150 kHz | ||
| 14000 – 14350 kHz | ||
| 18068 – 18168 kHz | ||
| 21000–21450 kHz | ||
| 24890–24990 kHz | ||
| 28000–29700 kHz | ||
| VHF | 50–54 MHz | Handheld: ≤10W Mobile : ≤200W Base/Repeater : ≤200W |
| 144–148 MHz | Handheld : ≤10W Mobile : ≤100W Base/Repeater : ≤100W | |
| UHF | 430–440 MHz | Handheld : ≤10W Mobile : ≤100W Base/Repeater : ≤100W |
| 1240–1300 MHz | ≤10W | |
| 2300–2450 MHz | ≤2W | |
| SHF | 3300–3500 MHz | ≤2W |
| 5650–5850 MHz | ≤2W | |
| 10000–10500 MHz | ≤0,5W |
Amateur Radio Transceiver Test Method
Amateur radio tranceiver testing is carried out to ensure the device meets technical standards. Ministerial Decree of the Ministry of Communication and Digital No. 44 of 2025. Here are some of the main points in the test:
- Electrical Safety: SNI IEC 60950-1:2016 or the latest version, SNI IEC 62368-1:2014 or the latest version, IEC 60950-1, and/or IEC 62368-1.
- EMC (Emission): SNI CISPR 32:2015 or the latest version, IEC CISPR 32, ETSI EN 301 489-1, and/or ETSI EN 301 489-15.
- EMC (Immunity): The Testing Method for immunity requirements is under the provisions in the THIRD Dictum of this Ministerial Decree.
- RF Output Power, Spurious Emissions, and Output power conducted: ETSI EN 301 783, ANSI/TIA 603, ANSI C63.26, and/or FCC Part 97. Spurious emission testing of transmitters is performed with a resolution bandwidth value in accordance with the reference testing method used.
Amateur Radio Transceiver Certification Process in Indonesia
For amateur radio tranceiver devices to be used legally in Indonesia, certification from DJID is required. Here are the steps to get it:
Pre-testing the device
Before official testing, the device must be pre-tested first using measuring equipment such as a spectrum analyzer.
This helps ensure devices meet technical standards before being tested in authorized laboratories.
Testing at an official laboratory
After passing the pre-testing, the gadget will be sent to an assigned official research facility to experience testing according to the guidelines stipulated in the Ministerial Decree of the Ministry of Communication and Digital No. 44 tahun 2025.
Issuance of certificates
After the device passes testing, an official certificate will be issued by DJID. This certificate is a requirement to market the device legally in Indonesia.
Tips to ensure standards compliance
- Learn the latest regulations: Make sure you understand every detail of the Ministerial Decree of the Ministry of Communication and Digital No. 44 tahun 2025, including technical requirements and test methods.
- Perform pre-testing: Before official testing, perform pre-testing to ensure the device meets standards. If you don’t have a measuring instrument, use the DJID certification service which provides pre-testing services.
- Counsel a master: If this is your to begin with time looking for certification, consider utilizing the administrations of experienced DJID certification administrations.
