Dashboard Camera Testing Standard Based on Ministerial Decree 12 Tahun 2025

Dashboard Camera Testing Standard Based on Ministerial Decree 12 Tahun 2025

Dashboard camera uses communication technologies such as WiFi that operates within a specific frequency spectrum. This technology must meet the main requirements through a standard testing process to ensure its quality, security, and compliance with applicable regulations.

With the increasing use of dashboard camera technology, the Indonesian government through Decree of the Minister (KEPMEN) No 12 Tahun 2025 from the Ministry of Communication and Digital (KOMDIGI) has established wireless power transmission testing standards to ensure that these devices are safe, efficient, and do not interfere with each other.

WiFi technology, which is widely used in dashboard camera devices must comply with this standard to be used legally in Indonesia.

This article will completely talk about the dashboard camera testing guidelines based on the most recent directions, counting the certification steps you require to know.

New Regulations on Dashboard Camera

Dashboard Camera Testing Standard Based on Ministerial Decree 12 Tahun 2025 2

KEPMEN KOMINFO No 12 Tahun 2025 specifies wireless power transmission operational frequencies to ensure devices work without interfering with other devices.

This control covers radio recurrence prerequisites, greatest transmit control, and testing for wild outflows (spurious emissions).

The following are the standard specifications:

NoTesting ParameterBenchmark
1Operating Frequency57-64 GHz
2Channel Bandwidth≤ 2,61 GHz
3RF Output Power≤ 40 dBm EIRP
4Power Spectral Density≤ 23 dBm/MHz EIRP
5Spurious EmissionsBased on table III.2
6Out-of-Band Emissionsa. -30 dBm/MHz
b. Table II.3, orc. Clause 4 ETSI EN 302 567 (the lowest version is v2.2.1)
7AntennaIntegrated antenna
8Physical Form of Access Pointa. Desktop form,
b. And cannot be mounted on a pole
9Access Point EnclosureIt is forbidden to have a weatherized enclosure.

Dashboard Camera Test Method

Dashboard Camera Testing Standard Based on Ministerial Decree 12 Tahun 2025 3

Dashboard camera testing is carried out to ensure the device meets technical standards. Ministerial Decree of the Ministry of Communication and Digital No. 12 of 2025. Here are some of the main points in the test:

  • Electrical Safety: SNI IEC 60950-1;2015 or the more recent, SNI IEC 62368-1;2013 or the more recent, IEC 60950-1; IEC 62368-1; and/or other relevant IEC or SNI standards.
  • EMC (Emission): ETSI EN 301 489 and/or ETSI EN 301 489-17; IEC CISPR 32; and/or SNI CISPR 32: 2015 or the more recent.
  • EMC (Immunity): The Testing Method for immunity requirements is under the provisions in the THIRD Dictum of this Ministerial Decree.
  • RF Output Power, Channel Bandwidth, Power Spectral Density, Spurious Emissions, and Out-of-band Emissions: ETSI EN 302 567 (lowest version is 2.1.1)

Dashboard Camera Certification Process in Indonesia

Dashboard Camera Testing Standard Based on Ministerial Decree 12 Tahun 2025 4

For dashboard camera devices to be used legally in Indonesia, certification from DJID  is required. Here are the steps to get it:

Pre-testing the device

Before official testing, the device must be pre-tested first using measuring equipment such as a spectrum analyzer.

This helps ensure devices meet technical standards before being tested in authorized laboratories.

Testing at an official laboratory

After passing the pre-testing, the gadget will be sent to an assigned official research facility to experience testing according to the guidelines stipulated in the Ministerial Decree of the Ministry of Communication and Digital No. 12 tahun 2025.

Issuance of certificates

After the device passes testing, an official certificate will be issued by DJID. This certificate is a requirement to market the device legally in Indonesia.

Tips to ensure standards compliance

  • Learn the latest regulations: Make sure you understand every detail of the Ministerial Decree of the Ministry of Communication and Digital No. 12 tahun 2025, including technical requirements and test methods.
  • Perform pre-testing: Before official testing, perform pre-testing to ensure the device meets standards. If you don’t have a measuring instrument, use the DJID certification service which provides pre-testing services.
  • Counsel a master: If this is your to begin with time looking for certification, consider utilizing the administrations of experienced DJID certification administrations.

Popular Post

5 Best Wireless Keyboard

Electronics

5 Best Wireless Keyboard

Best Wireless Keyboard – In today’s market, you’re no longer stuck with clunky wires! From lightning-fast gaming keyboards with pro-level ...

What is Radar

Regulations

What is Radar? How it Works and How is Testing Standard

We often see radar in the airport or even in the sci-fi or action movie. Especially for the movie, many ...

Adobe's Ink and Slide

Electronics

Introducing Adobe’s Ink and Slide, a useful Touch Pen

Adobe’s Ink, – narmadi.com. The development of touchscreen technology has forced manufacturer to manufacture their device under the full screen ...

Leave a Comment