Indonesia is undoubtedly interesting for many manufacturers. Its strategic geographical location combined with their emerging economic and demography bonus make this country not only plays as a global manufacturer, but also a big and potential market. To access Indonesian market, especially for ICT products, there’s a compliance instrument that manufacturer must comply with. This compliance instrument is called “DJID certification”, or usually also called as “SDPPI certification” or “Postel Certification”.
DJID stands for “Direktorat Jenderal Infrastruktur Digital”, or “Directorate General of Digital Infrastructure” in English. This is an institution under the Ministry of Communication and Digital Affairs of Indonesia with responsibility of establishing communication technology standard, performing product testing through its local laboratories, issuing compliance certificate called “DJID Certificate”, and monitor the certified products in the market.
Getting DJID certification can be tricky. Although it accepts foreign test reports using international standard such as CE or FCC, in some cases DJID also obligates local test especially if the test reports don’t suffice their requirements. But, with the long experience and expertise in DJID certification niche, Dimulti Indonesia is ready to help you dealing with the complication of DJID certification procedure, eliminating hassles during the process, and get you the certificate based on expected target date.
Table of Contents
Indonesia DJID Certification Process
The process of obtaining Indonesia DJID Certificate for ICT products is divided into two stages: Obtaining Test Reports and Application Submissions. The requires test reports are:
- Radio Frequency (RF) test Report
- Electromagnetic Compatibility (EMC) test report
- Electrical Safety test report >> only mandatory for product supplied by direct AC power
- Laser Safety test report
- Specific Absorption Rate (SAR) test report >> only mandatory for tablet or mobile phone
DJID Certificate Example
DJID Label Requirement
ICT product that has been certified by DJID is mandatory to affix DJID label on product and packaging. This label consists of three components:
All these three label components must be affix on product and on packaging. In the case that product size is too small making it impossible to affix the label on it, it is allowed to affix on packaging only.
DJID Regulation and Standard
Here is the list of technical regulation and standard used in DJID certification process
For other technologies and regulation that are not mentioned here, you can get more detailed information about it by contacting our contact windows.
DJID Product Scope
DJID certification is not limited to telecommunication product only. But this certification is also mandatory to all products that have telecommunication features or radio frequency. Some examples of products that are mandatory to apply DJID certification are:
| Home Appliances: Smart Dishwasher Smart Oven Smart Washing Machine Smart Refrigerator Smart Air Conditioner Smart Wine Chiller Smart Coffee maker Smart Fan Electronic Water Meter Sensor Smart Lighting system Smart water closet Robot vacuum cleaner Smart locker Etc. | Automotive: Tire Pressure Monitoring Sensor Head Unit/Car Audio Telematic Unit Body Control Module Immobilizer Keyless Wireless Charing Unit Vehicle Radar Dashboard Camera Seat-belt Sensor Door-Lock Sensor Vehicle Dashcam Etc. |
| Audio-Video Devices: Wireless Speaker Smart Television or Digital Television Monitor Wireless Microphone Microphone Receiver In-ear monitoring device Headset/headphone True Wireless Earbud Projector Speakerphone Etc. | Telecommunication Products: Smartphone Line/wired telephone Tablet PC Handy Talkie/Walkie Talkie Switch Router Access Point Video Conference Cordless telephone IP Phone Etc. |
| Medical and Healthcare products: Blood Glucose Monitoring system Blood pressure monitoring system MRI system Smart Operating Table Digital Radiography Smart syringe pump Body Height measurement Body weight measurement Bluetooth Oximeter Etc. | Wearable: Smartwatch Smart Ring Smart tag Running shoes tracker Smart eyeglasses Etc. |
| Environmental Monitoring Product: Wildfire Sensor Whether Sensor Etc. | Mining: Smart detonator system Tunnel light signal Etc. |
Contact Us!
Have some inquiries to get your product certified by DJID?
Contact Form
DJID News and Updates
Regulatory Updates
FAQ
What are the document requirements to obtain DJID Type Approval?
The document requirements that must be submitted are product specification, product photos, self-conformity declaration letter, MOU or distributor agreement (between certificate holder or applicant and brand owner), RF, EMC, Laser Safety (for products that have optical interface), and Electrical Safety Test Reports.
Who should be Applicant on Indonesia DJID Approval Certification, manufacturer or Importer?
Certificate holder must be a local company that is registered in Indonesia. It can be distributor, importer, or brand representative.
Is local testing on DJID Certification Mandatory?
For RF, EMC, and Electrical Safety Testing in the local lab is optional, especially if the product already has Test Report issued by DJID-recognized International Test Lab. For Laser safety and SAR, testing must be done at a local lab in Indonesia.
What are the sample requirements?
For EMC and Electrical Safety Test the samples required are normal (commercial product). For RF Test, especially product with radio frequency from 920 MHz and above typically testing Lab request conducted sample (sample with RF cable affixed to the RF module inside) with test software. For product with radio frequency under 920 MHz typically testing Lab request normal or radiated sample. SAR test required radiated samples with test software. And for Laser Safety test, we need one host device (switch or router) with one pair compatible SFP transceiver.
How to get Type Approval certificate with Paperwork?
Document evaluation or paperwork can be done if the product has RF, EMC, and Electrical Safety test report issued by overseas lab that is recognized by DJID. Other documents are still attached.
How long is the lead time of Indonesia DJID Type Approval and Certification?
Lead time of application through Local Test Approach is around 5 weeks. On the other hand, the lead time through paperwork is about 1 week.
How long is the validity of Indonesia DJID Certificate?
Validity is 3 years from the issuance date of the certificate. If after 3 years the goods are still being manufactured, assembled, or imported for being used or sold in Indonesia, they must be recertified again. If the goods are no longer manufactured, assembled, or imported for being used or sold in Indonesia after 3 years, recertification is not needed. The existing stock in Indonesia still can use the old certificated until it runs out.
What are the requirements of DJID Certification Label?
Label requirements consist of 3 components, namely identity (certificate number and PLG ID), QR code, and Warning Sign. All three components must be affixed to the product and its packaging. In the case that product size is too small making it impossible to affix the label on it, it is allowed to affix on packaging only.
What we do!
We’re always happy to hear from you.