Zigbee technology is a remote communication convention planned to interface gadgets with low control utilization in a network.
It is based on the IEEE 802.15.4 standard and employment work organizing to make strides in communication steadiness and extension. Zigbee technology underpins numerous gadgets in keen homes, mechanical, and indeed agrarian ecosystems.
These Zigbee testing benchmarks are contained the same with Zigbee technology in the Decree of the Minister of Communication and Information Technology No. 260 of 2024 which coordinates diverse specialized points, amplifying from radio repeat, and transmitting control, to testing methods.
Also Read
This article will conversation around the Zigbee technology testing rules based on the most later headings, tallying the certification steps you require to know.
Table of Contents
New Regulation on Zigbee Technology
KEPMEN KOMINFO No. 260 Year 2024 indicates Zigbee operational frequencies to guarantee gadgets work without interferometer with other devices.
This control covers radio repeat prerequisites, the most prominent transmit control, and testing for wild outpourings (spurious emissions).
The taking after are the standard specifications:
| Radio Frequency Band | RF output power | Transmitter Spurious Emission | Testing Method |
| 314 – 316 MHz | ≤ 10 dBm ERP | EN 300 220-1 | EN 300 220-1 |
| 433 – 434.79 MHz | ≤ 10 dBm ERP | EN 300 220-1 | EN 300 220-1 |
| 920 – 923 MHz | ≤ 20 dBm EIRP | EN 300 422 | EN 300 422 |
| FCC 15.247 and/or 15.209 | FCC 15.247 and ANSI C63.10 | ||
| 15.249 and/or 15.209 | FCC 15.249 and ANSI C63.10 | ||
| 2400 – 2483,5 MHz | ≤ 20 dBm EIRP | FCC 15.249 and/or 15.209 | FCC 15.249 and ANIS C63.10 |
| FCC 15.247 and/or 15.209 | FCC 15.247 and ANIS C63.10 | ||
| EN 300 440 | EN 300 440 | ||
| EN 300 328 | EN 300 328 |
Zigbee Testing Standards
Spurious emission testing
Spurious emissions are undesirable signals radiated exterior of the device’s working recurrence band. Spurious outflow control points to anticipate obstructions with other devices.
Spurious emission limits:
Stray emissions must be underneath the limits indicated in worldwide benchmarks EN 300 220, FCC 15.209, and FCC 15.247.
Testing is carried out utilizing gadgets such as range analyzers.
Test method:
EN 300 220: Primary standard for Zigbee testing.
FCC 15.249 and FCC 15.247: To guarantee worldwide compatibility.
Electromagnetic compatibility (EMC)
EMC testing guarantees Zigbee devices:
- Not exasperated by electromagnetic obstructions from other devices.
- Does not cause electromagnetic obstructions that influence other devices.
Test standards:
EN 301 489-1: For common electromagnetic compatibility.
EN 301 489-3: As it were for Short Range Devices (SRD) devices.
Goal: Guarantee Zigbee gadgets work well in thick electromagnetic environments.
Non-ionizing radiation testing
Because Zigbee gadgets are frequently utilized by close clients, KEPMEN KOMINFO No. 260 of 2024 controls non-ionizing radiation limits to guarantee client safety.
Test Method:
Measurements are carried out utilizing extraordinary gear to confirm that radiation levels are inside the secure limits set by ICNIRP (International Commission on Non-Ionizing Radiation Protection).
Goal: Ensure the user’s well-being and guarantee the gadget is secure for long-term use.
Zigbee Type Approval and Certification Process in Indonesia
For Zigbee gadgets to be utilized legally in Indonesia, certification from DJID is required. Here are the steps to get it:
Pre-testing the gadget
After passing the pre-testing course of activity, the contraption will be sent to a consigned official examination office to experience testing by the benchmarks stipulated in ensuring contraptions meet specialized rules a few times as of late being endeavored in authorized ask nearly offices.
Testing at an official research facility
After passing the pre-testing, the contraption will be sent to an alloted official inquire about office to involvement testing by the measures stipulated in the Ministerial Decree of the Ministry of Communication and Digital No. 260 of 2024.
Issuance of certificates
Issuance of certificates after the contraption passes testing, an official certificate will be issued by DJID. This certificate is a prerequisite to progressing the contraption really in Indonesia.
Tips to Ensure Rules Compliance
- Learn the most afterward controls: Make past any address you get each detail of the Ministerial Decree of the Ministry of Communication and Digital No. 260 of 2024, tallying specialized prerequisites and test techniques.
- Perform pre-testing: At a few focuses as of late official testing, perform pre-testing to ensure the contraption meets the rules. If you don’t have a measuring instrument, utilize the DJID certification service which gives pre-testing organizations.
- Counsel a ace: If this is your start with time looking for certification, consider utilizing the organizations of experienced DJID certification organizations. <UN>
