Home theaters are becoming increasingly in demand as home entertainment. But many still don’t know how to home theater setup to get the best viewing experience.
How to home theater setup including defining the room, choosing the right device, determining the position of the speakers according to the configuration, to audio and video calibration
This article will give you the information for your guide on how to home theater setup in order to feel the best experience of watching the movie.
Also Read
Table of Contents
How to Home Theater Setup
To do a home theater setup, what needs to be taken care of is the space to be used, the right devices, and configuring the audio and video. Here are the steps for home theater setup:
1. Defining the room
Determining the room is the first step in building a home theater setup. Because the size of the room will affect the viewing experience. To get the optimal viewing experience with a home theater, you can consider choosing a room size that is not too small or too large with natural lighting. Make sure the room is sufficient and comfortable to watch with several people to watch.
2. Choosing the right device
Next, for a home theater setup, you need to determine the right devices, from the TV/projector, speakers, and AV receiver. For the TV or projector, you can adjust to the size of the room and your preference.
In choosing the speakers, you can adjust to the configuration you want (5.1, 7.1, etc.) by paying attention to the amplification power. Also, pay attention to the selection of the AV receiver, which is the heart of the home theater system, to connect all the devices and control the sound.
3. Connecting the devices
After choosing the right device, you need to connect all the devices. Connect the TV/Projector, Blu-ray player, and other devices to the AV receiver via HDMI. Connect the speakers to the output of the AV receiver using the speaker cable.
4. Determining the position of the speakers according to the configuration
The front speakers (left and right) can be placed on opposite sides of the screen, with the speakers aligned on a plane parallel to the screen. The center speaker is placed midway between the left and right speakers, or below the screen.
Surround speakers are placed on the sides or back of the audience, according to the desired configuration. And the subwoofer is placed in the corner of the room or near the front speakers.
5. Audio and video calibration
The last and quite important thing is to perform audio and video calibration. Use the microphone that comes with the AV receiver to perform automatic calibration. Set the sound level, delay, and other audio settings according to your preferences.
Set the resolution and refresh rate on the source device (Blu-ray player, etc.) to match the TV/projector. Calibrate the color and brightness of the TV/projector for optimal picture quality.
The following are the guides how to home theater setup that you need to know. When you want to set up a home theater, the things that you need to consider are defining the room, choosing the right device, to audio and video calibration.
Another thing to note is that home theater on the market uses Bluetooth or WiFi technology; this technology must pass the certification test from the Directorate General of Digital Infrastructure (DJID).
With DJID certification, users can feel calm about using a home theater device whose quality and security are guaranteed. For manufacturers or importers of home theater devices, obtaining certification from DJID is a mandatory step before the device can be officially marketed in Indonesia.
To simplify the certification process, you can use Type Approval Certification Services for ICT Products are available to assist with this process as a reliable solution.
