On 1st February 2025, the Standard and Industrial Research Institute of Malaysia (SIRIM) announced about designated Malaysia testing labs for IPv6 non-Wi-Fi-enabled products. This announcement is refer to the reference number SQASI/CMCS/1/25/0001.
Regarding the SIRIM official announcement, you must know the labs that were officially chosen for Malaysia testing labs for IPv6 non-Wi-Fi Enabled .
This article will inform you of the updated information regarding SIRIM official announcement number SQASI/CMCS/1/25/0001 which concerns designated Malaysia testing labs for IPv6 non-Wi-Fi-enabled products.
Also Read
Table of Contents
IPV6 Certification in Malaysia
IPV6 equipment is required to be certified in Malaysia from July 10th, 2020 forward. This approach is practiced beneath the specialized code MCMC MTSFB TC T013:2019 Internet Protocol Version 6 (IPv6) – Equipment Compliance (First Revision).
The items that are included inside this scope are all IPv6-based gadgets counting Terminals/Hosts (e.g. 3G/4G/5G Access Points) and Organize Security Components (e.g. Firewalls). And Network Elements (e.g. Switching/Gateway Equipment).
Therefore, if you are around to disseminate a few of these items to Malaysia, if you don’t mind make any doubt that the Certificate of Conformity for IPv6 gadgets has as of now gotten through the intervals endorsement plot.
The Update Information of Testing Labs for IPv6
IPv6 cellular equipment without a WiFi interface or IPv6 equipment over other mediums (e.g.: fiber optic etc. except Ethernet LAN), currently in place, which ends on 10th July 2025, will not be extended. Full approval shall be granted after 10th July 2025, provided that applicants submit a complete IPv6 test report, including for non-Wi-Fi-enabled products.
Therefore, the renewal of the Certificate of Conformity (CoC) submission after 10th July 2025 will not be permitted unless an IPv6 test report is submitted for SIRIM’s evaluation.
Full approval will only be granted if IPv6 over cellular interfaces or other applicable mediums fully meets IPv6 requirements. For Wi-Fi-enabled products, testing may be conducted at any IPv6-accredited laboratory.
Designated Malaysia Testing Labs for IPv6
SIRIM is pleased to announce the availability of testing laboratories for IPv6 (non-Wi-Fi-enabled) products. The designated laboratories include:
- BII Laboratory (China): BII Group Holdings Ltd China,3rd Floor, Building 5, No.58 Jing Hai Wu Lu, BDA, Beijing 101111 China.
- CNLabs (India): CNLABS Test Services Pvt. Ltd, Unit S-01, Ground Floor, Explorer Bldg, International Tech. Park, Bangalore, KA 560 066, India
- SIRIM QAS International (Malaysia): RF&EMCT Laboratory, Building 11, SIRIM Complex 1, Persiaran Dato’ Menteri, Section 2, 40700 Shah Alam, Selangor.
That’s all the updated information regarding SIRIM official announcement number SQASI/CMCS/1/25/0001 which concerns designated IPv6 testing labs for non-Wi-Fi-enabled products.
This policy does not impact imports, customs, trade, market surveillance, spectrum management, or technical standards. Something that you must be concerned about the policy is the impact on type approval and market access requirements.
If you find a difficult to arrange the testing process and the certification for IPv6 testing labs for non-Wi-Fi-enabled products just contact the great Type Approval Certification Services for ICT Products in Malaysia to help with your problem.
