Low Power Devices Testing, In order to sell the product ( devices with emission below 10mW ) in Indonesia market your product needs to comply with the regulation requirement (approval test standard and technical requirements) of Direktorat Jenderal Sumber Daya dan Perangkat Pos dan Informatika (SDPPI)
What is meant by tools and equipment with emission power below 10 mW are tools and equipment using radio transmitter with low power and operate using emission power of not more than 10 mW (the correct terms are: below 10 mW) with main characteristics as shown in the table
Low power devices testing will be based on our national standards: KEPDIRJEN No.214/DIRJEN/2005. The national standards are mainly adopted from EN 300.220-1, EN 300.224-1, EN 300.330 and FCC part 15.209 The key parameters are as follows:
- Radiated Emission Limits.
|Frequency (MHz)||Field strength |
|Distance Measurement (meters)|
|0.009 – 0.450|
0.450 – 1.705
1.705 – 13.567
13.567 – 30.0
30 – 88
88 – 216
216 – 960
- Error frequency shall be below 50 kHz.
- Use of power booster (integrated into SRD devices) isn’t permitted
- Receiver sensitivity shall be below -113 dBm
- The Transmission power shall be below 10mW (ERP)
Here are some of devices could be included in Low power device / Short range devices category: alarms, identification systems, radio-detection, vehicle radar systems, wireless local area networks, remote controls, telecommand, telemetry, on-site paging systems, cordless keyboard, vehicle keyless entry. etc.
Please find embedded file below of the official regulation of the Decree of The Director General of Post And Telecommunication Number : 214/DIRJEN/ 2005 about Technical Requirement of Tools and Equipment with Emission Power Below 10 mW.
Low Power Devices Testing
We though our short explanation about Approval test standard for Low power devices testing clear enough, If you have any question regarding to obtain SDPPI approvals do not hesitate to contact us