Pakistan Type Approval Summary
Pakistan is a growing and high-volume telecommunications market with more than 200 million mobile subscribers. This growth is also driven by the country’s expanding digital inclusion.
With a population of approximately 250 million people, Pakistan is the fifth most populous country in the world. It’s no surprise that competition to enter this market is quite intense—not to mention the regulatory and infrastructure challenges.
These factors present challenges for manufacturers and importers seeking to enter the Pakistani market. The first step in overcoming these challenges is to understand the applicable compliance requirements.
These compliance requirements are known as “PTA Type Approval.” PTA stands for the Pakistan Telecommunication Authority, Pakistan’s national telecommunications regulator.
The authority was established under the Pakistan Telecommunication (Re-Organization) Act, 1996. PTA regulates telecommunications services, manages radio frequency spectrum, protects consumer interests, and oversees the approval of telecommunications equipment for the Pakistani market.
Understanding the requirements and process for PTA type approval will make it easier for manufacturers and importers to market their telecommunications devices in Pakistan. This will allow them to enter one of the largest markets in South Asia.
Who Can Be an Applicant?
- Local representative
- Not required
There is no requirement to use a local representative (although this is permitted). Foreign manufacturers may apply directly, provided they submit proof of the company's legal status in their country of origin.
Application Method
- In-country testing
- No
- Paperwork only
- Yes
In Pakistan, type approval certification is generally based on paperwork or document evaluation. There is no mandatory local testing requirement as part of the certification process.
However, applicants must understand the applicable technical standards and the requirements for testing laboratories that issue test reports.
Technical Standards
All devices intended for distribution in Pakistan must comply with the applicable technical standards. PTA, as the regulatory authority, adopts internationally recognized standards as references. These standards are issued by the following recognized standardization bodies:
- Telecommunication Standardization Sector (ITU-T)
- European Standards (EN)
- The International Electrotechnical Commission (IEC) and its International Special Committee on Radio Interference (CISPR)
- The European Committee for Electrotechnical Standardization (CENELEC)
- The European Telecommunications Standards Institute (ETSI)
- Occupational Health and Safety Assessment Series (OHSAS)
- International Organization for Standardization (ISO)
- Directive 2014/53/EU on Radio Equipment (RED)
Applicants must ensure that the standards used apply to the product category and technical requirements of the device to meet the certification requirements.
Testing Laboratories
To facilitate foreign manufacturers, the authority permits the use of the manufacturer's own laboratory for device testing. However, the laboratory must be capable of performing all required tests in accordance with recognized international standards.
In addition, the testing laboratory must be accredited by the accreditation body of the country of origin. A copy of the accreditation certificate must be included with the application.
If suitable testing laboratories are not available in the device's country of origin, applicants may use a testing laboratory in another country, provided that it is accredited to ISO/IEC 17025 and meets the same requirements.
Submission Documents
All required documents and samples must be submitted directly to the Authority's office in Islamabad.
Process Flow
The following is the type approval certification process in Pakistan:
- Prepare the application forms and supporting documents.
- Pay the application processing fee upon submission of the application.
- Submit the application and device samples.
- Initial review: PTA verifies the completeness of the submitted documents and issues an application reference number.
- Technical evaluation: PTA reviews the submitted documents, test reports, and device samples.
- Certificate issuance: If all requirements and technical standards are met and the applicable fees have been paid, PTA may issue a Type Approval Certificate.
Sample Requirements
Although local testing is not required for type approval certification, PTA still requires applicants to submit a product sample.
Each application must include one standard sample, subject to the following conditions:
- The sample must be complete and include all accessories necessary for technical evaluation.
- The sample may be disassembled by PTA for internal inspection of the hardware or PCBA.
- A software SOP for inspecting the system, operating system, firmware, and programmed frequencies must be included.
- A video demonstration of the device's features must be included (PTA may also request a live demonstration during the inspection).
Document Requirements
The following is a list of documents required for the certification application:
- Application Form
- Proof of Payment
- Company Legal Documents (including those from countries outside Pakistan)
- Board Authorization (authorization from the board of directors to proceed with certification, specifically for foreign manufacturers)
- National Accreditation/ISO 17025 Certificate for the testing laboratory
- Manufacturer’s Declaration of Conformity (DoC)
- Test Report
- Technical Data Sheet
Submission process
- Submission
- Offline
All required documents and samples should be submitted to the Authority's office at the following address: Pakistan Telecommunication Authority (PTA) Headquarters, F-5/1, Islamabad, Pakistan. Please note that documents submitted in digital format may be provided on a CD, DVD, or USB drive.
Lead Time of Certification
- Lead time
- 2-3 days
Due to its paperwork-based evaluation process, type approval certification in Pakistan is relatively fast. If all documents are deemed complete and the evaluation proceeds smoothly, the certificate can be issued within two to three days of receipt of the documents and samples.
Validity Period
- Validity
- Permanent
The certificate remains valid indefinitely as long as there are no changes to the hardware. Software changes that do not involve hardware changes do not require a new Type Approval. Changes to the certificate information may be updated through an addendum.
Label Requirements for Pakistan Type Approval
- Product label
- Required
- Approval mark
- Required
- E-labeling
- Allowed
Under current regulations, the authority requires labels to be affixed to approved equipment. The label must include the unique Type Approval number issued by PTA and a statement indicating that the device has been “Approved by PTA.” However, the authority does not provide a sample label.
The label may be physically affixed to the device. Alternatively, if this is not possible, it may be included on the packaging or in the user manual. The authority also permits the use of an e-label on devices equipped with a screen, or on devices that operate in conjunction with a screen-equipped device. In such cases, the label must be displayed on the screen.
Alternative Country Names
Islamic Republic of Pakistan, Pakistani, Paquistan, Pákistán, Pakisztán, an Phacastáin, Pakistania, Pakisitá, kisygue, Phakistani, Paquistão, Bakistaan, Pokiston, Pacistan, باكستان, 巴基斯坦, パキスタン, 파키스탄, Пакистан
Rules by Technology
Allowed, approval required
- Wi-Fi 2.4 GHz
- Wi-Fi 5 GHz
- Wi-Fi 6E (6 GHz)
- Wi-Fi 7
- Bluetooth Classic
- Bluetooth Low Energy
- NFC
- RFID
- UWB
- Zigbee
- Thread
- Z-Wave
- DECT
- 2G/3G
- 4G LTE
- 5G NR
- NB-IoT
- LTE-M
- LoRa / LoRaWAN
- Sigfox
- Automotive radar (77 GHz)
- Short-range radar (24 / 60 GHz)
- GNSS (GPS)
- Satellite communication
- Wireless charging (Qi)
- PMR / Walkie-talkie
- Amateur radio
- Passive Optical Network (PON)
- Wavelength Division Multiplexing (WDM)
- Coaxial Cable
- ISDN
- Ethernet
- VoIP
- IPv6
- Power Line Carrier
- Microwave Link
- Free Space Optics
- Digital Audio Broadcasting (DAB)
Talk to our project handler
Send your product details and we reply with the PTA requirements, lead time and cost.
Request a quote