Eswatini Type Approval Summary
Eswatini is a small telecommunications market in Southern Africa that is undergoing digital transformation, driven by high mobile adoption. With a population of approximately 1.3 million, mobile network coverage reaches virtually the entire population. In fact, many users maintain more than one mobile connection.
Like most countries in Africa, Eswatini faces challenges related to data costs and access disparities. However, this does not pose an obstacle for manufacturers or importers looking to market their telecommunications devices.
To be part of this evolving market, manufacturers and importers need to understand the compliance requirements for bringing their telecommunications products into the country. These compliance requirements are known as “ESCCOM Type Approval.”
ESCCOM stands for the Eswatini Communications Commission. It is the regulatory body responsible for overseeing the communications sector in Eswatini.
This commission regulates telecommunications services and networks, broadcasting services, postal services, and the use and allocation of radio spectrum. ESCCOM was established under the Swaziland Communications Commission Act No. 10 of 2013.
Understanding ESCCOM’s type approval requirements and certification process is an important first step for manufacturers and importers seeking to enter the Eswatini market. Obtaining this proof of compliance will make it easier for manufacturers and importers to market their telecommunications devices.
Who Can Be an Applicant?
- Local representative
- Not required
Applicants for type approval certification in Eswatini are not limited to local entities. There is no requirement for foreign manufacturers to use a local representative. However, once a product has been certified, its distribution must be the responsibility of a company based in Eswatini that is legally registered as a supplier or distributor.
Application Method
- In-country testing
- No
- Paperwork only
- Yes
There are two options for type approval certification in Eswatini: Type Approval and Type Acceptance. Each option has different requirements and documentation.
The process is based on paperwork or document evaluation. Local testing is not a common method in this process.
Type Approval
Eswatini has developed its own technical standards for type approval requirements. These standards are based on international standards, namely ETSI (a European standard for RF and EMC testing) and IEC (an international standard for safety and SAR testing).
Testing against these standards must be conducted by an ISO/IEC 17025-accredited testing laboratory. Please also note that the laboratory's scope of accreditation must be appropriate for the product being tested.
To date, there are no testing laboratories in Eswatini that meet these requirements. Therefore, applicants may use foreign testing laboratories.
It should also be noted that Eswatini's national standards are based on international standards. Testing laboratories used for Type Approval may apply standards that are equivalent to Eswatini's national standards, which is acceptable.
Type Acceptance
Eswatini also recognizes certificates of conformity issued by other countries or jurisdictions. Currently, only two jurisdictions are recognized: ICASA in South Africa and the EU/CE. Please note that the ICASA certification process also accepts devices that have already undergone the EU certification process.
If the applicant relies on one of these certifications, proof of certification must be submitted together with the test report.
Document Submission
All required documents must be submitted through the online portal provided by the authority as part of the application process. ESCCOM will then evaluate the application to verify that the product complies with the applicable technical regulations.
Sample Requirements
Generally, sample requirements are not mandatory for this process because local testing is not a common method.
However, the authority may require applicants to submit device samples for evaluation. The number of samples required and the applicable requirements depend on the authority's request. According to the applicable regulations, samples must be submitted under the following conditions:
- In good working order
- Properly configured for testing and equipped with the necessary test adapters
- Clearly labeled with the brand name, model, and serial number
Document Requirements
An application for approval of communications equipment shall be submitted in the prescribed forms issued by the Commission and shall be accompanied by:
- Test reports
- Technical, physical, operational, installation and user information
- Software and firmware version numbers
- Proof of payment
- Type approval certificate from recognized country or jurisdiction (for type acceptance)
Submission process
- Submission
- Online
All application documents must be submitted through the online portal provided by the Commission at http://registration.esccom.org.sz/.
A successful application will result in the Commission issuing a type approval certificate, while an unsuccessful application will result in the Commission issuing a letter stating the reasons for the rejection.
Where the Commission requires clarification regarding the technical details or other specifications of the equipment submitted for type approval or type acceptance, it will notify the applicant and require a response in the prescribed manner within the period specified by the Commission.
An application for type approval or type acceptance shall be rejected, or deemed to have been rejected, if the applicant fails to respond within two months from the date of the Commission's request for additional information or clarification.
Lead Time of Certification
- Lead time
- 60 days
The applicable regulations state that the Commission shall evaluate the application and notify the applicant of its decision within 60 days of receiving the application. This period includes the issuance of the certificate where the application is approved.
Validity Period
- Validity
- Permanent
A type approval certificate is valid for an unlimited period, provided that:
- No modifications are made to the equipment with respect to the brand, product name, model, and function as recorded on the type approval certificate and in the type approval register.
- There are no significant changes to the technical specifications of the equipment, including, but not limited to, the operating frequency band, RF power, and the technical standards on which the equipment was type approved.
If any of the changes mentioned above occur, a new application must be submitted for the modified model or type.
Label Requirements for Eswatini Type Approval
- Product label
- Required
- Approval mark
- Required
Current regulations require products to bear labels. These labels must include:
- The Commission's logo
- The type of equipment
- The alphanumeric identification of the equipment
However, in practice, these labeling requirements have not been consistently enforced.
Alternative Country Names
Swaziland, Swasieland, Ngwane, Kingdom of Swaziland, Kingdom of Eswatini, Esvatini, Svazi, Pow Swati, Svazijsko, Royaume d’Eswatini, Swasiland, Esuatini, إسواتيني, 史瓦帝尼, スワジランド, 스와질랜드, Эсватини
Rules by Technology
Allowed, approval required
- Wi-Fi 2.4 GHz
- Wi-Fi 5 GHz
- Wi-Fi 6E (6 GHz)
- Wi-Fi 7
- Bluetooth Classic
- Bluetooth Low Energy
- NFC
- RFID
- UWB
- Zigbee
- Thread
- Z-Wave
- DECT
- 2G/3G
- 4G LTE
- 5G NR
- NB-IoT
- LTE-M
- LoRa / LoRaWAN
- Sigfox
- Automotive radar (77 GHz)
- Short-range radar (24 / 60 GHz)
- GNSS (GPS)
- Satellite communication
- Wireless charging (Qi)
- PMR / Walkie-talkie
- Amateur radio
- Passive Optical Network (PON)
- Wavelength Division Multiplexing (WDM)
- Coaxial Cable
- ISDN
- Ethernet
- VoIP
- IPv6
- Power Line Carrier
- Microwave Link
- Free Space Optics
- Digital Audio Broadcasting (DAB)
Talk to our project handler
Send your product details and we reply with the ESCCOM requirements, lead time and cost.
Request a quote